|
|
|
| -
No skill or machine required - Fast, convenient and easy to use - Low cost - Fast turnaround time - Photo quality imprint |
 |
|
1.Cut
out the fraphic you want.
|
|
 |
 |
|
2.Immerse
the paper in water. In about 30 sec.the fixing paper will absorb
enough water and can be separated from the transparency
|
3.Hold
the paper (two layers together) and transfer it to the surface of
your substrate. Shift the paper a little bit. Use your finger to
hold the transparency in position. Pull and shift the fixing paper
away slowly. Shift and fix the transparency onto the position you
want.
|
 |
 |
|
4.Use
paper towel or a piece of cloth to squessze the water. Avoid excessive
pressure that may shift or danage the transparency.
|
5.
When applying to large area, you may use a plastic squeegee to squeeze
the bubble and water away.
|
 |
 |
|
6.
Idle for about 15 mins. The printed graphic will transfer onto the
surface of the substrate. Use a forceps to peel off the transparency
(on more use).
|
7.
If there is some residual on the surface, use paper towel or cloth
to clean.
|
 |
 |
|
8.
When dried, place the subject in oven and baked. The baking temperature
and curling time various with materials. Please refer to the attached
chart for details.
|
Finished
|
